Magic UI 3.1
New Magic UI 3.1 Update: Honor 30S getting v3.1.1.129 and Honor 30 getting v3.1.1.131 update with core optimization
Honor has started rolling out the 5th update for the Honor 30S (CDY-AN90 & CDY-TN90) and 4th update for the Honor 30 (BMH-AN10 & BMH-TN10) smartphone users. The update comes with a download size of 397 MB. Check the complete changelog below.
Honor 30S Magic UI 3.1.1.129 Changelog: 5th Update (397MB)
- Version Update: 3.1.1.126 -> 3.1.1.129
- [Camera] Optimize camera shooting
- [System] Optimize system stability.
Check the Honor 30S previous update here.
Honor 30 Magic UI 3.1.1.131 Changelog: (840MB)
- Version: 3.1.1.122 -> 3.1.1.131
- [Camera] Optimize camera shooting in some scenes effect.
- [System] Optimize system performance and stability, make your phone run smoother, stable.
Check the Honor 30 previous update here.
Note: This update is currently rolling out in China.
How to update Honor 30 and Honor 30S?
Go to Settings -> tap on ‘System & updates’ -> ‘Software update’ -> ‘Check for updates’ -> ‘Download and install’.
Honor 30S Update Screenshot:
Honor 30 Update Screenshot:
Honor 30 Specifications:
- Display – 6.53 -inch FHD+ OLED, 90Hz
- Resolution – 2400×1080
- Mobile Software – Magic UI 3.1 (Android 10)
- Rear Camera – 40MP f/1.9 + 8MP ultra-wide + 8MP f/3.4, OIS, 50X zoom + 2MP f/2.4
- Front Camera – 32MP F/2.0
- Processor – Kirin 985 5G
- RAM – 6GB/8GB
- Storage – 128GB/256GB
- Battery – 4000mAh (40W Wired)
Honor 30S 5G Specifications:
- 6.5 inch HDR10 Display
- 2.4mm
- Side fingerprint
- Kirin 820 5G
- Rear (Quad) Camera – 64MP (f/1.8)+ 8MP (f/2.4)+ 8MP(f/2.4) + 2MP (f/2.4) ISO 320
- Front – 16MP
- RAM – 8GB
- Mali G57
- Storage – 128GB/256GB
- Android 10 + Magic UI 3.1.1
- 40W fast charging
- 4000 mAh battery
Note: If you have received the latest EMUI update on your smartphone, you can send us an email (firmware@huaweiupdate.com) with Screenshots/Updates/Versions/Changelogs.
The new Magic UI 3.1 software update is now available for the Honor Play 9A users in China. The latest software update is rolling out with firmware version 3.1.0.197. The May 2022 patch includes 19 High levels, and 9 mediums while there are no low levels of CVEs.
Honor Play 9A Magic UI 3.1.0.196 Changelog:
Version Update: 3.1.0.196→3.1.0.197
Honor Play 9A MOA-AL00, MOA-AL20 & MOA-TL00.
This update improves system security using patches.
[Security]
Integrates security patches released in May 2022 for improved system security.
Honor Play 9A Specifications:
- Display – 6.3 Inch HD + IPS Waterdrop Notch Display
- Software – Android 10 based on MagicUi 3.0.1
- Front Camera – 8MP
- Rear Camera – 13MP + 8MP
- RAM – 4GB
- Storage – 64/128GB
- Battery – 5000mAh, 10W Charging
- Other – Fingerprint, Face Unlock, 3.5mm Audio Jack, USB Type-C Port, 4G VoLTE, Bluetooth, And Wi-Fi Support.
- Sensors – Ambient Light Sensor, Digital Compass, Gravity Sensor, and Gyroscope
Notes:
- This update will not erase your data but backing up your important data before updating might be useful if in case anything happens.
- Before updating make sure that your phone has 50% or above charge.
- Download the update through Wi-Fi to avoid extra mobile data charges or failure in downloading the update.
- Please wait patiently until the update is processed successfully.
- The update rolls out in batches so it may take some time/days to get to your device.
Download Honor Play 9A Magic UI May 2022 update from your smartphone Settings option, just tap on Settings > System > Software update > Check for Updates and Download it!
Or, You can also get this update via the Support app: Support > Services -> Update > Check for updates.
If you have received the latest EMUI update on your smartphone, you can send us an email (firmware@huaweiupdate.com) with Screenshots/Updates/Versions/Changelogs.
Honor has started kicking off the May 2022 security patch update for its eligible devices. On the list, the company has now started sending this software update for the Play 3 smartphone users in mainland China. The latest May 2022 patch for Honor Play 3 comes with software version Magic UI 3.1.0.166.
To recall, the Honor Play 3 was launched in September 2019, it is powered by Octa-core (2.2 GHz, Quad-core, Cortex A73 + 1.7 GHz, Quad-core, Cortex A53) processor and inside runs on the HiSilicon Kirin 710F Chipset. The device has 4 GB RAM and 64 GB internal storage. As far as the camera concern, for selfies it has an 8 MP Front Camera, and on the rear, there’s a 48MP + 8MP + 2MP camera with features like Digital Zoom, Auto Flash, Face detection, Touch to focus. It is backed by a 4000 mAh battery. Check the current update changelog below.
HONOR PLAY 3 Update Version 3.1.0.166 Changelog:
Version Update: 3.1.0.165-> 3.1.0.166
This update improves system security using security patches.
[Security]
Integrated security patches released in May 2022 for improved system security.
Note: The update is rolling as usual via OTA in China, download it now.
How to check the latest update?
Check the latest update from your phone settings option: Go to the Settings -> ‘System’ -> ‘Software update’ -> ‘Check for updates’ -> ‘Download and install’.
Check Via Support App: Open the latest version of Support app -> ‘Services’ -> ‘Update’ -> ‘Check for updates’ ->‘Download and install’.
If you have received the latest EMUI update on your smartphone, you can send us an email (firmware@huaweiupdate.com) with Screenshots/Updates/Versions/Changelogs.
Honor Play 9A users are now able to install the April 2022 security patch update in China. The latest software update is rolling out with firmware version 3.1.0.196. The April 2022 patch includes 19 High levels, and 9 mediums while there are no low levels of CVEs. Check the changelog below.
Honor Play 9A Magic UI 3.1.0.196 Changelog:
Version Update: 3.1.0.195→3.1.0.196
Honor Play 9A MOA-AL00, MOA-AL20 & MOA-TL00.
This update improves system security using patches.
[Security]
Integrates security patches released in April 2022 for improved system security.
Honor Play 9A Specifications:
- Display – 6.3 Inch HD + IPS Waterdrop Notch Display
- Software – Android 10 based on MagicUi 3.0.1
- Front Camera – 8MP
- Rear Camera – 13MP + 8MP
- RAM – 4GB
- Storage – 64/128GB
- Battery – 5000mAh, 10W Charging
- Other – Fingerprint, Face Unlock, 3.5mm Audio Jack, USB Type-C Port, 4G VoLTE, Bluetooth, And Wi-Fi Support.
- Sensors – Ambient Light Sensor, Digital Compass, Gravity Sensor, and Gyroscope
Notes:
- This update will not erase your data but backing up your important data before updating might be useful if in case anything happens.
- Before updating make sure that your phone has 50% or above charge.
- Download the update through Wi-Fi to avoid extra mobile data charges or failure in downloading the update.
- Please wait patiently until the update is processed successfully.
- The update rolls out in batches so it may take some time/days to get to your device.
Download Honor Play 9A Magic UI April 2022 update from your smartphone Settings option, just tap on Settings > System > Software update > Check for Updates and Download it!
Or, You can also get this update via the Support app: Support > Services -> Update > Check for updates.
If you have received the latest EMUI update on your smartphone, you can send us an email (firmware@huaweiupdate.com) with Screenshots/Updates/Versions/Changelogs.
